End Mills

  Home > Aluminum >

  Garr HSAL Ball End - 2 Flutes Alumastar Coated Carbide End Mill
HSAL Ball End - 2 Flutes Alumastar Coated
 

HSAL Ball End - 2 Flutes Alumastar Coated

  • Solid submicron grain carbide end mill - center cutting
  • Specific coating engineered to repel aluminum
  • Engineered to run at 750-2500 SFM (225-750 M/Min.)
  • For high speed machining of aluminum
  • High velocity - high metal removal rate (for spindles 10,000 RPM and above)
  • Need to use properly balanced holders
  • Holds perpendicularity
  • Flats can be added within 48 hours

* Metric equivalents are for reference only

TOLERANCES
d1 +.000" –.001" (+.000 –.025mm)
d2 3mm - 6mm +.0000" –.0003" (+.0000 –.0075mm)
1/4" - 1" –.0001" –.0004" (–.0025 –.0100mm)
Ball radius +.0000" –.0005" (+.0000 –.0127mm)


Item# Item Name Our Price Qty Add
42522 (0.1575) Dia.= 4.00mm x Shank= 6.0 x FL= 12 x OAL= 50 $25.73
42582 (0.1875) Dia.= (3/16") 4.76mm x Shank= 3/16" x FL= 9/16" x OAL= 2" $19.09
42642 (0.1969) Dia.= 5.00mm x Shank= 6.0 x FL= 16 x OAL= 65 $26.56
42702 (0.2362) Dia.= 6.00mm x Shank= 6.0 x FL= 19 x OAL= 65 $25.71
42762 (0.2500) Dia.= (1/4") 6.35mm x Shank= 1/4" x FL= 3/4" x OAL= 2-1/2" $24.42
42842 (0.2756) Dia.= 7.00mm x Shank= 8.0 x FL= 19 x OAL= 65 $37.38
42902 (0.3125) Dia.= (5/16") 7.94mm x Shank= 5/16" x FL= 3/4" x OAL= 2-1/2" $32.32
42962 (0.3150) Dia.= 8.00mm x Shank= 8.0 x FL= 19 x OAL= 65 $34.01
43022 (0.3750) Dia.= (3/8") 9.52mm x Shank= 3/8" x FL= 7/8" x OAL= 2-1/2" $37.67
43102 (0.3937) Dia.= 10.00mm x Shank= 10.0 x FL= 24 x OAL= 70 $57.77
43182 (0.4724) Dia.= 12.00mm x Shank= 12.0 x FL= 32 x OAL= 75 $71.46
43242 (0.5000) Dia.= (1/2") 12.70mm x Shank= 1/2" x FL= 1-1/4" x OAL= 3" $67.89
43322 (0.6250) Dia.= (5/8") 15.87mm x Shank= 5/8" x FL= 1-5/8" x OAL= 4" $117.42
43382 (0.6299) Dia.= 16.00mm x Shank= 16.0 x FL= 40 x OAL= 100 $123.62
43442 (0.7500) Dia.= (3/4") 19.05mm x Shank= 3/4" x FL= 1-5/8" x OAL= 4" $152.40
43482 (0.7874) Dia.= 20.00mm x Shank= 20.0 x FL= 32 x OAL= 100 $213.93
43542 (0.9843) Dia.= 25.00mm x Shank= 25.0 x FL= 38 x OAL= 100 $247.53
43602 (1.000) Dia.= (1") 25.40mm x Shank= 1" x FL= 1-5/8“ x OAL= 4" $259.91
Check the items you wish to purchase, then click

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Aluminum
Aluminum > 2 Flute
Aluminum > Corner Radius
Aluminum > Ball


Garr HSAL Square End - 3 Flutes Alumastar Coated Carbide End Mill
Garr 3 Flute - 50 Degree Balinit X.CEED Coated Carbide End Mill
6 Flute - 40 Degree X.CEED Coated
6 Flute - 40 Degree Uncoated
6 Flute - 40 Degree TiCN Coated
5 Flute - Corner Radius - Balinit X.CEED Coated
5 Flute - 45 Degree Helix Uncoated
5 Flute - 45 Degree Helix TiCN Coated
5 Flute - 45 Degree Balinit X.CEED Coated